Reduce

For trapezoidal sheet roofs in particular, SOLEOS offers an attachment system which has crossbar profiles and is suitable for all module types. The ReDuce installation system is a riveted variant used mainly for sloped trapezoidal roofs. Modules are placed directly on the rails and locked into place. Wind and eddy forces are low here because the contact surface of the wind is lower due to the lower mounting position. On the ReDuce system, a special coating ensures securing of the countersunk head screws in the pressure plates and the correct seating of the threaded plates. All screws are stainless steel and rustproof and all rails are made of sea water-resistant aluminium (EN AW 6060).

Reject

The ReJect installation system is an elevated system suitable for different subsurfaces and facades. Triangles are available in all angles and sizes, welded or bolted - depending on customer requirement. The system is secured with weight loading, hanger bolts or rivets. For the lightweight design of trapezoidal plates in particular, an extended variant of the ReJect system is available as a riveted elevation with so-called wind defectors. The rivet joint (the ground rails are riveted directly to the trapezoidal plate) and the wind defector compensate for the wind forces and no additional weighting is necessary.