SOLEOS Integrate

The main components of this installation system are aluminium plates which are bolted to the roofing battens. These form a kind of trough for accommodating the other parts. Both vertical and horizontal module installations are possible.

All of the attachment materials are part of the pre-configured installation system. You also receive materials for final sealing of the system as per the installation notes. Because the plates are split into vertical sections, there is a "chimney suction effect" in every segment which cools the modules. This results in particularly positive yield trends.

Integreos

Integreos is the first in-roof system for which the standard modules can be used as a water-bearing layer. This was specially developed for the requirements arising from the French feed-in law, but is suitable for the whole of Europe with its flexible application areas. The innovative leak tightness concept is new in the Integreos system. Given that, for standard modules, the seal between frame and glass is only used for mechanical embedding of the module, no water tightness is guaranteed. If water should penetrate the module at this place, special grooves are used to drain the water. The distance between modules is only 6 mm. The appearance of the system is hence also a benefit because it looks like an enclosed surface.

Intersole

The InterSole is the ideal system to integrate modules of all sizes and from all manufacturers into sloped roofs – without problems and watertight. Mounted on your roof using an extremely ingenious design of overlapping plastic sheets and special anchors, the solar panels are equipped to weather storms.